Try our Spit Pulsa Range for Faster and Safer Installations
For faster and safer installations try our Spit Pulsa range. With a number of easy cabling fixing solutions that meet the 18th Edition Wiring Regulations (BS 7671:2018) and which reduce dust.
The Spit Pulsa cordless gas nailer range offers maximum productivity with additional health and safety benefits such as the reduction of dust on site. Choose from a number of high-quality fixings for the quick and easy installation of cables, conduit and pipework.
Specialising in concrete / steel fastening systems, the Spit brand is widely recognised in the construction market throughout Europe. It offers solutions for all building professionals: electricians, plumbers, plasterers, metalworkers, facadiers, masons etc.
The Spit brand is one of the forerunners for concrete and steel fastening solutions and provides its users with maximum comfort and potential time-saving.
Pulsa 40E and Pulsa 40P+
The fastest, most durable and reliable tool for direct fixing of electrical cable management. These new and enhanced cordless gas nailers are for M&E applications and can be used for fixing into concrete, steel, masonry and timber.
They have an impressive 3,500 shots per charge so you can work more and charge less. Using one of the Pulsa 40 nailer’s can be up to 8 times faster than traditional methods of fixing.
As well as speed the Pulsa 40 also has a number of health and safety benefits with reduced hand / arm vibration and maximum dust protection. Using a Pulsa cordless gas nailer, means there is no more need to drill holes for fixings, which drastically reduces the risk of dangerous dust.
In addition to the cordless gas nailers themselves Pulsa also offer a range of fixings designed for use with the nailers to provide quick and simple fixing solutions for pipework, cabling and conduit. Many of which comply to the 18th Edition Wiring Regulations (BS 7671:2018), such as:
Pulsa Metal Clip Elec - Compliant to the 18th Edition Wiring Regulations (BS 7671:2018), these are an aesthetic metal cable tie base solution for up to 9mm wide cable ties, that’s quick and easy to install.
Pulsa Metal Clip Elec - Snap Off - Compliant to the 18th Edition Wiring Regulations (BS 7671:2018), these are similar to the Metal ClipElec, however this version has a handy snap off safety tab for holding in position before firing.
Pulsa Metal Ceiling Cable Tie Clip - Compliant to the 18th Edition Wiring Regulations (BS 7671:2018), these simple right-angled steel clips are for the installation of suspended light duty components with metal cable ties.
Pulsa Steel Single P-Clips - Compliant to the 18th Edition Wiring Regulations (BS 7671:2018), P-Clips can be installed quickly for fixing cable, conduit and pipework.
Pulsa Threaded Rod Hanger Clip - Compliant to the 18th Edition Wiring Regulations (BS 7671:2018). An alternative to traditional drop-in anchors to quickly and easily hang M8 and M10 studding, chains or suspension cables.
18th Edition Wiring Regulations (BS 7671:2018)
What does compliance to the 18th Edition Wiring Regulations (BS 7671:2018) actually mean for the use of cable ties? Metal fire-resistant fastenings and fixings should support all cabling installations at any point that provides access for people to quickly exit a building. In the event of fire metal cable ties and their fixings wont melt when exposed to extreme heat, preventing the premature collapse of cabling installations which can happen with plastic cable ties.
Ensuring all cable installations in escape routes are fixed with metal fire-resistant components will improve fire safety, protecting against fire and smoke. Remember an installation is only as strong as its weakest point, so both metal cable ties and fixings need to be used to be compliant.
Related Products
Pulsa offer a wide range of pins to choose from, but here are our two best sellers:
Pulsa HC6 FH P800 Pins - Premium flush head pins for concrete and steel.
Pulsa HC6 P800 Pins - Standard pins for concrete and steel.
Pulsa Bulk Buy Deal
Currently we are running a Bulk Buy Deal when you order a selection of 25,000 Pulsa Pins or Fixings! Simply order 25,000 Pulsa Fixings or Pins listed above and choose to:
1. Buy a Pulsa 40E Cordless Gas Nailer for just £99 (+VAT) – A saving of £473
Or
2. Get a Pulsa 800E Elift Pole for Free – A saving of £413
Download our flyer or Contact our Sales Team to find out more…
You can view and order our Pulsa range online here. Alternatively, for further information on Pulsa Nailers or Fixings or to order directly, contact our Sales team on: 01322 274226 or [email protected]